Baicells Nova452 Outdoor TDD eNodeB
- SKU: sBS77410
- Manufacturer: Baicells
- Data Sheet: Download
Product Information
The Baicells Nova452 is an advanced outdoor eNodeB (eNB) that complies with LTE TDD and is hardware-ready for 5G NR technology. This 4x40 W eNB operates in Carrier Aggregation (CA) mode or Dual Carrier (DC) mode.
In CA mode, the Nova452 supports 2CC (2 Component Carriers) DL/UL CA, effectively doubling DL/UL peak throughput by aggregating two separate spectrum resources into a virtual contiguous spectrum resource.
In DC mode, each carrier functions as an independent cell, supporting 512+512 users and allowing for bandwidths of 5, 10, 15, 20, or 100 MHz for NR. Using the Nova452 in DC mode simplifies and streamlines the deployment of split sectors. Additionally, the Nova452 offers the HaloB embedded EPC option, migrating core network functions to the eNB.
The product comes with a standard one-year warranty, and there is an option to purchase an extended warranty.
Product Features
- GUI-based local and remote Web management
- Excellent Non-Line-of-Sight (NLOS) coverage
- Peak rate up to DL 580Mbps with 4x4 MIMO CA mode
- Peak rate up to UL 70Mbps with CA mode
- Supports 512 RRC-connected users per cell, 512+512 RRC-connected users in DC mode
Specifications
Specifications
| Standard | LTE TDD RAN (3GPP R15 compliant) |
| TDD UL/DL Configuration | 1, 2, 6 (with Special Subframe Configuration 7) |
| Frequency Band | B40 (2300 MHz–2400 MHz) B41 (2496 MHz–2690 MHz) B42 (3400 MHz–3600 MHz) |
| Channel Bandwidth | SC: 5/10/15/20 MHz, or Max 100 MHz in NR mode CA: 40 MHz as maximum aggregated bandwidth |
| Multiplexing | 4x4 MIMO (DL) |
| Security | Radio: SNOW 3G/AES-128 Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128, SHA-256) |
| INTERFACE | |
| Ethernet Interface | 1 optical (SFP) Ethernet interface (1 GE) 1 optical (SFP) CPRI or eCPRI (config as RRU mode) |
| Power Supply | -40 VDC to -57 VDC, nominal -48 VDC AC adaptor (multi-national standards) |
| Protocols Used | IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, DHCP |
| Network Management | IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
| VLAN/VxLAN | 802.IQ/VxLAN |
| LED Indicators | 5 x status LED RUN/ACT/ALM/LINK0/LINK1 |
| PERFORMANCE | |
| User Capacity | Up to 512 RRC connected users per cell • SC/CA: 512 RRC connected users • DC: 512+512 RRC connected users |
| Maximum Deployment Range | 60 kilometers |
| Latency | 30 milliseconds |
| Receive Sensitivity | -103 dBm (per channel) |
| Modulation | MCS0 (QPSK) to MCS27 (256 QAM) DL: QPSK, 16 QAM, 64 QAM, 256 QAM UL: QPSK, 16 QAM, 64 QAM |
| Transmit Power Range | 27 dBm to 46 dBm per channel (combined +52 dBm, configurable) (1 dB interval) |
| Quality of Service | Nine-level priority indicated by QoS Class Identifiers (QCI) |
| ARQ/HARQ | Supported |
| Synchronization | GPS |
| Voice | VoLTE, Circuit Switched Fallback (CSFB)* |
| SON | Self-Organizing Network • Automatic setup • Automatic Neighbor Relation (ANR) • PCI confliction detection |
| EPC | HaloB (Embedded EPC) |
| Traffic Offload | Local breakout |
| Layer 2 Support | Transparent Bridge Mode |
| Maintenance | • Local/Remote Web maintenance • Online status management • Performance statistics • Fault management • Local/Remote software upgrade • Logging • Connectivity diagnosis |
| LINK BUDGET | |
| Antenna Connection | 4T4R external high-gain antenna with 4.3-10 connectors |
| GPS Antenna | External GPS antenna, N-Type connector |
| VSWR | < 1.5 |
| Power Control | UL Open-loop/Closed-loop Power Control, DL Power Allocation (3GPP TS 36.213 compliant) |
| RET | AISG2.0, 24 VDC to 30 VDC, RS-485, 3GPP TS 25.461 |
| PHYSICAL | |
| Surge Suppression | Yes |
| Power Interface Lightning Protection | Differential mode: ±10 KA Common mode: ±20 KA |
| MTBF | ≥ 150000 hours |
| MTTR | ≤ 1 hour |
| Ingress Protection Rating | IP66 |
| Operating Temperature | -40°F to 131°F / -40°C to 55°C |
| Storage Temperature | -49°F to 158°F / -45°C to 70°C |
| Humidity | 5% to 95% RH |
| Atmospheric Pressure | 70 kPa to 106 kPa |
| Power Consumption | Typical 520 W, maximum 560 W |
| Weight | Without bracket: 31 lb/14.1 kg With pre-installed bracket: 32.4 lb/14.7 kg |
| Dimensions (HxWxD) | 16.5 x 12.4 x 4.8 inches 420 x 315 x 123 millimeters |
| Installation | Pole or wall mount |