Baicells Nova246 Outdoor TDD eNodeB
- SKU: sBS81040
$10,395.92
- Manufacturer: Baicells
- Data Sheet: Download
Product Information
The Baicells Nova246 is an outdoor LTE TDD dual carrier (DC) eNodeB with 2*20 watts output power. It is a low-cost and easy-to-install eNodeB, which integrates frequency radio unit and baseband in one box, minimizing location requirements. It can help operators to provide greater coverage and higher capacity with minimal effort, realizing data access for wireless broadband (WBB) and mobile broadband (MBB) networks.
Specifications
Specifications
| Standard | LTE TDD RAN (3GPP Release 13.5 compliant) |
| TDD UL/DL Configuration | 0, 1, 2 (with Special Subframe Configuration 7) |
| Frequency Band | B38 (2570 MHz–2620 MHz) B40 (2300 MHz–2400 MHz) B41 (2496 MHz–2690 MHz) B48 (3550 MHz–3700 MHz) |
| Channel Bandwidth | 5/10/15/20 MHz (Any combination) |
| Multiplexing | MIMO: 2x2 (DL) |
| Security | Radio: SNOW 3G/AES-128/ZUC Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128, SHA-256) |
| INTERFACE | |
| Ethernet Interface | 1 RJ-45 Ethernet interface (1 GE) and 1 optical (SFP) interface |
| Power Supply | -40 VDC to -57 VDC, nominal -48 VDC AC adaptor (multi-national standards) |
| Protocols Used | IPv4, UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
| Network Management | IPv4, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
| VLAN | 802.IQ |
| LED Indicators | 4 x status LED CELL1/CELL2/ALM/PWR |
| User Capacity | Up to 96 RRC connected users per cell (4 users per TTI) SC: 96 RRC connected users DC: 96+96 RRC connected users |
| Maximum Deployment Range | 28 kilometers |
| Latency | 30 milliseconds |
| Receive Sensitivity | -102 dBm (per channel) |
| Modulation | -102 dBm (per channel) |
| Transmit Power Range | 0 to 46 dBm (combined, with 1 dB interval) |
| Quality of Service | Nine-level priority indicated by QoS Class Identifiers (QCI) |
| ARQ/HARQ | Yes |
| Synchronization | GPS |
| Voice | VoLTE, Circuit Switched Fallback (CSFB) to GSM |
| SON | Self-Organizing Network Automatic setup Automatic Neighbor Relation (ANR) PCI confliction detection |
| EPC | HaloB (Embedded EPC) |
| RET Support | Yes |
| Traffic Offload | Local breakout |
| Layer 2 Support | Transparent Bridge Mode* |
| Maintenance | Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Automatic start and configuration Alarm reporting User information tracing Signaling trace |
| Antenna Connection | N-Type connector for external high-gain antenna |
| GPS Antenna | External GPS antenna, N-Type connector |
| VSWR | < 1.5 |
| Power Control | UL Open-loop Power Control, DL Power Allocation (3GPP TS 36.213 compliant) |
| PHYSICAL | |
| Surge Suppression | Yes |
| Power Interface Lightning Protection | Differential mode: ±10 KA Common mode: ±20 KA |
| Standard | ≥ 150000 hours |
| MTTR | ≤ 1 hour |
| Ingress Protection Rating | IP66 |
| Operating Temperature | -40°F to 131°F / -40°C to 55°C |
| Storage Temperature | -49°F to 158°F / -45°C to 70°C |
| Humidity | 5% to 95% RH |
| Atmospheric Pressure | 70 kPa to 106 kPa |
| Power Consumption | Typical 155 W, maximum 180 W |
| Weight | 24.9 lb/11.3 kg (with pre-installed bracket) |
| Dimensions (HxWxD) | With joint: 17.6 x 11.3 x 4.4 inches 447 x 287 x 113 millimeters Without joint and handle: 17.0 x 9.7 x 4.4 inches 431 x 247 x 113 millimeters |
| Installation | Pole or wall mount |